More Info Page

ESU 50300 Navigator Digital Wireless System MM/DCC
ESU50300
At this point we present to you our new Navigator system. This digital command station was developed for model railroaders who operate a small or a midsize layout and who do not want to abandon contemporary control techniques. Thanks to its bi-directional infrared technique, the Navigator allows wireless control of your locos! The Navigator had also been available as well-priced DCC version. However, this version is sold out now. Run locos The Navigator controls up to 40 locomotives; locos speaking DCC or Motorola® are appropriate. Depending on the decoders´ abilities, the Navigator switches up to 21 functions per locomotive and is able to handle up to 9999 addresses (up to 255 addresses are possible during Motorola® operation). Of course every loco can be named and assigned individually with an adequate symbol. Multiple consists You can also drive multiple consists with the Navigator; up to 6 locomotives can be moved at the same time. During consist operation access to the functions of each loco is granted - at any time; e.g. you are able to activate the horn of the leading loco. Switch magnetic accessories As is expected of a modern digital command station, the Navigator also switches your magnetic accessories and turnouts. It doesn´t matter whether you still use the original Märklin® k83 or k84, or the SwitchPilot which is compatible to it; you may construct up to 100 magnetic accessories on your layout and switch them. The Navigator handles Motorola® and DCC decoders. Locomotive settings Sometimes you cannot avoid changing the settings of your decoders during digital analog operation. The Navigator supports you with the programming of the decoders via its clearly structured operation interface. All CVs of DCC decoders can be read and changed on the programming track. If you use programmable Motorola® decoders (e.g. Märklin® mfx® decoders), you are able to change all appropriate registers (01-80) without any difficulty. Central unit: H4 booster with 3.0A continuous output-load H4 output programming track with 0.25A Connection for ECoSlink (slave jack, for ECoS connection) Possibility to connect 5 IR receivers (4 connections for cable extension, 1 direct connection for plug on) USB computer interface Märklin® Motorola® old and new, with 14 or 28 speed steps ´ DCC with 14, 28, 128 speed steps Up to 9999 addresses in DCC operation; up to 21 functions per loco; in Motorola® operation up to 4 + 1 functions Up to 255 addresses in Motorola® operation (depending on decoder available) Märklin® Motorola® and DCC track formats to control magnetic accessories Up to 40 loco objects and 100 switching objects possible. All DCC service modes programming on programming track, POM (programming on the main). Programming of Motorola® decoders on programming track. Remote control unit: Wireless bi-directional IR communication Backlit FSTN LC dispay (custom designed); displays name of loco, speed, driving direction, state of function keys 11 function keys + shift key to activate 21 functions each per each 4 menu keys Emergency stop and direction switch key 4-way joystick for speed control and loco selection 2 battery cases for rechargable batteries (current supply) IR receiver: Wide range receiver including 5 IR transmitter diodes and 2 receivers Direct connection possible or extension via 8-pin plug cable Wall fastening possible Included in delivery: Navigator central unit IR receiver module IR remote control unit Adjustable power supply 15V-21V (90VA) Terminals for mail track and programming track connection Carrying strap for remote control unit Set of 4 batteries (Alkaline, „AAA“) Instruction manual

$297.29

How many?:

EUROLOKSHOP The best discount European model train railway online store

Open Mon - Fri 10:00 AM - 6:00 PM - Closed Saturday & Sunday